At the beginning of the video, the photographer explains how to smart thermostats mounted on a heater. Wiesner says that he is not a craftsman, but he still judges the assembly It was easy. The e thermostats are suitable for common heating valves of the type M30x1.5 and thanks to the supplied adapter can also be used for heater valves of the types Danfoss RAVL, Danfoss RA, Danfoss RAV, Giacomini, Caleffi and M28x1.5. Wiesner used this adapter and explains that he simply put it on his hand heater installed has.
Wiesner then shows the usage on the device in the manual mode. To be on the safe side, he measured the set temperature displayed on the device again and says: That's pretty accurate. All in all, he finds it super easy to use in manual mode.ch“.
The smart use of thermostat works with the ZigBee center. Once linked to the home WiFi network, it communicates with the thermostat via the ZigBee radio standard. Regardless of the location, both the thermostat and the control center can be conveniently accessed via the free smartphone app „Smart Life can be adjusted at will. Wiesner, for example, explains that Heating schedule mode, which he likes to use for himself. This allows the temperature to be selected in up to ten different schedules for individual days, weekdays or weekends for any time of day.
He also finds the separately available one to be practical Door and window sensor. When the door opens, the heating turns off. When the door is closed, the heating comes on again. And so the sensor is already explained quite simply. Of course that is also possible z simply set via app, as he explains in the video.
The use of smart thermostats is particularly useful for him. Since he's not always in the studio, he has set himself two modes: I'm there and I'm not there. So Wiesner can easily, before he drives off at home, the e Heating via app in the studio so that it is already pleasantly warm in the studio when he arrives. Comfortable and efficient heating so very easy via touch of a button.